NanoCote™ Thermal Coatings
NanoCote™ thermal ceramic is a single component spray applied thermal barrier coating encompassed of ceramics and acrylics (water based). This product is easy to apply in new or retrofit construction and enhances the performance of insulation, HVAC Duct Work, Wall Systems, and Roof Systems for all types of substrates including metal, brick, cement block, concrete, wood, or sheet rock.
The NanoCote™ thermal coating is MAS Certified Green and UL® Classified as a Class A Fire Retardant with a 0 (zero) Flame Spread. When used as the Primary Thermal Envelope (PTE), it seals the structure and minimizes Solar/Radiant Heat Gain. Lowering built-up heat due to solar heat gain results in lower roof temperatures and reduced cooling costs. Thermal ceramic guards insulation against moisture, thermal transfer, thermal bridging, and conduction; it also allows entrapped moisture to escape all of which provides an environment closer replicating the lab conditions where insulation is assigned its “R” value. In addition, it is sustainable as it lowers the energy consumption of a structure, prolongs the life of the building materials and adds no harmful VOCs to the indoor or outdoor environment during installation, service or dismantling and recycling.
Best results will be realized if product is applied using a commercial quality airless paint sprayer (see EQUIPMENT SPEC). Roof applications are best with two coats of 15-20 mils each for total +/- 35 mil DFT (dry film thickness). Allow first coat to dry completely. DO NOT APPLY if temperatures are less than 50o F.
Follow the guidelines outlined in the Application Guide for further instruction. Apply the product based on NRCA guidelines and follow all applicable OSHA procedures. Use of proper PPE gear is mandatory, eyewear and respirator as well as sun block is recommended to be used during roof applications. Respirators and proper ventilation required for interior applications.
If specific colors are desired please contact NanoEclat, Inc., or Global Nano Sciences, Inc. Interior applications normally require one +/- 20 mil coat. The NanoCote™ thermal coat has excellent performance as a primer/topcoat on many surfaces and substrates. Surface needs to be thoroughly clean and dry; free of dirt, dust, oil, peeling paint and other foreign material. Thoroughly pressure wash area and repair all leaks and cracks.
The Thermal coat can be used to repair small cracks and leaks. Rust should be cleaned with a wire brush; use suitable metal primer-sealer where significant amounts of Rust are identified is also recommended. Product can be applied on surfaces from 50° F up to 400° F (10° C-204° C) with special training
Professional quality sprayer such as or similar to GRACO 7900, with a pick up of at least 1.5-2 GPM and tip size based on the application. Use warm soapy water to clean tools and spatters. Product should be stored between 40° F and 120° F (4° C-- 48 °C) DO NOT store in direct sun light and protect the product
The technical information contained herein is true and accurate at the date of issuance and can be changed without notice. Specific product warranty is available upon request. Specially trained contractors in accordance with NanoEclat, Inc. and Global Nano Sciences can provide warranty.
Roofs - 10 years to Life of the structure (Ask about our Maintenance Program)
Interior walls, ceilings - Life of the Structure
For applications that involve, scraping, sanding, and or removing old paint please contact the National Lead Information Hotline 1-800-424-LEAD or a Lead